wpe13.gif (3383 bytes)  Polishing Gel-Coat

Polishing Molds

Sand:                    400 grit or finer.

Compound:          Parko Tigre Kut with a wool pad. DO NOT BUFF CLEAN.

Polish:                  Parko 1750 with wool polishing pad.  Extend dried material with water.

Removing Blemishes from Gel-Coat

Compound:          Parko Tigre Kut with a wool pad. DO NOT BUFF CLEAN.

Polish:                  Parko 1750 with wool polishing pad. Extend dried material with water.

Removing Scratches from Gel-Coat

Sand:                    320 to 400 wet, followed by 1000 to 1200 wet.

Clean:                   Wipe with a clean cloth.

Compound:          Parko Euro 1000 with wool compounding pad. Extend dried material with water.

Wash:                   Excess material can be removed using hot water with a soft cloth, or by normal
                            washing materials and procedures.

For further technical assistance, call 413-452-2000 x319

Links to Other Tech Tips:
Polishing 2K Paint
Polishing Pads

[Home] [Tech Tips Menu] [Products] [Contact Parko]

Heatbath Corporation 1998-2004